| 33 | 1 | Kurt Chip Guard - HD6-248 | HD6-248 | $40.00 | |
| 0 | Kurt Locating Pin - HDM6-277 | HDM6-277 | $61.00 | |
| 4 | 1 | Kurt Rear Nut - HDM6-3R | HDM6-3R | $318.00 | |
| 9 | 1 | Kurt Front Nut - HDM6-3F | HDM6-3F | $318.00 | |
| 13 | 1 | Kurt End Plate, Front, Metric - HDM6-333 | HDM6-333 | $123.00 | |
| 20 | 2 | Kurt Stationary Jaw Locating Pin for use with the HDLM6 Metric v - HDM6-277A | HDM6-277A | $40.00 | |
| 24 | 1 | Kurt Plastic Thumb Screw Knob - HDM6-22 | HDM6-22 | $6.00 | |
| 23 | 1 | Kurt Screw, Adjusting - HDM6-18 | HDM6-18 | $18.00 | |
| 26 | 2 | Kurt Spring Guide, Metric - HDM6-142 | HDM6-142 | $12.00 | |
| 14 | 1 | Kurt O-Ring, Buna N, #122 - HD6-96 | HD6-96 | $6.00 | |
| 12 | 1 | Kurt O-Ring, Buna N, #126 - HD6-68 | HD6-68 | $5.00 | |
| 5 | 1 | Kurt Screw - HD6-5 | HD6-5 | $149.00 | |
| 22 | 2 | Kurt Stationary Jaw Clamp - HD6-35 | HD6-35 | $23.00 | |
| 3 | 1 | Kurt Compression Spring - HD6-327 | HD6-327 | $18.00 | |
| 27 | 2 | Kurt Compression Spring - HD6-267 | HD6-267 | $8.00 | |
| 2 | 1 | Kurt Rear End Plate - HD6-253 | HD6-253 | $91.00 | |
| 21 | 2 | Kurt Clamp Sleeve - HD6-209 | HD6-209 | $29.00 | |
| 8 | 1 | Kurt Retaining Ring - D50-30 | D50-30 | $6.00 | |
| 6 | 1 | Kurt Wiper Ring - DL640-97 | DL640-97 | $7.00 | |
| 7 | 1 | Kurt Retaining Ring - DL640-217 | DL640-217 | $6.00 | |
| 28 | 1 | Kurt Handle Assembly - DL640-10-SA | DL640-10-SA | $91.00 | |
| 10 | 2 | Kurt Thrust Bearing Washer - D60-42 | D60-42 | $7.00 | |
| 11 | 1 | Kurt Thrust Bearing - D60-41 | D60-41 | $7.00 | |
| 34 | 1 | Kurt O-Ring, Buna N, #117 - 3600V-99 | 3600V-99 | $6.00 | |
| 35 | 2 | Kurt Screw, SHCS, M10 X 1.5 X 45mm LG for use with the HDLM6 Met - 26-0232 | 26-0232 | $6.00 | |
| 25 | 2 | Kurt Screw, SHCS, M5 X .8 X 6mm LG - 26-0082 | 26-0082 | $6.00 | |
| 19 | 1 | Kurt Roll Pin, 1/4 X 7/8 - 04-4428 | 04-4428 | $6.00 | |
