| 0 | Kurt Hard Stationary Jaw, J Style (Metric) - HDLM4J-6 | HDLM4J-6 | $145.00 | |
| 44 | 2 | Kurt Screw, Drive, #2 X 0.25 - 07-0230 | 07-0230 | $6.00 | |
| 0 | Kurt Stationary Jaw Pin Assembly, 4 piece - HDLM4-277-KIT | HDLM4-277-KIT | $308.00 | |
| 38 | 2 | Kurt Locating Pin, Stationary Jaw for use with the HDL4 English - HDL4-277 | HDL4-277 | $45.00 | |
| 46 | 2 | Kurt Screw, Alt. 5/16-18 UNC SHCS for use with the HDL4 English - HDL4-18 | HDL4-18 | $10.00 | |
| 0 | Kurt HDL Nut & Screw Assembly - HDLM4-3-SA | HDLM4-3-SA | $719.00 | |
| 3 | 1 | Kurt Nut, Machined, Rear - HDLM6-3R-SA | HDLM6-3R-SA | $191.00 | |
| 0 | Kurt HDL4 Repair Kit 1 - HDL4-KIT1 | HDL4-KIT1 | $31.00 | |
| 14 | 1 | Kurt Spacer - HDLM4-61 | HDLM4-61 | $29.00 | |
| 7 | 1 | Kurt Screw - HDLM4-5 | HDLM4-5 | $87.00 | |
| 1 | Kurt Nut, Rear - HDLM4-3R-SA | HDLM4-3R-SA | $169.00 | |
| 6 | 1 | Kurt Nut, Front - HDLM4-3F-SA | HDLM4-3F-SA | $187.00 | |
| 11 | 2 | Kurt Clamp, Stationary Jaw - HDLM4-35 | HDLM4-35 | $29.00 | |
| 39 | 1 | Kurt Spring, Pre-load - HDLM4-311 | HDLM4-311 | $13.00 | |
| 38 | 2 | Kurt Locating Pin, Stationary Jaw for use with the HDLM4 Metric - HDLM4-277 | HDLM4-277 | $45.00 | |
| 35 | 2 | Kurt Chip Guard, Movable - HDLM4-249 | HDLM4-249 | $13.00 | |
| 34 | 1 | Kurt Chip Guard, Stationary - HDLM4-248 | HDLM4-248 | $10.00 | |
| 32 | 1 | Kurt Clamp, Friction - HDLM4-225 | HDLM4-225 | $20.00 | |
| 27 | 1 | Kurt Holding Block - HDLM4-212A | HDLM4-212A | $72.00 | |
| 26 | 2 | Kurt Clamp Sleeve - HDLM4-209 | HDLM4-209 | $33.00 | |
| 24 | 4 | Kurt Plug, Protective - HDLM4-191 | HDLM4-191 | $8.00 | |
| 46 | 2 | Kurt Screw, Alt. M8x1.25 SHCS for use with the HDLM4 Metric vers - HDLM4-18 | HDLM4-18 | $10.00 | |
| 22 | 2 | Kurt Spring Guide - HDLM4-142 | HDLM4-142 | $12.00 | |
| 2 | Kurt Spring, Compression - HDLM4-267 | HDLM4-267 | $8.00 | |
| 10 | 1 | Kurt Collar - DL430-8A | DL430-8A | $20.00 | |
| 21 | 1 | Kurt O-Ring, 1.0 I.D. X 1.25 O.D. - DL430-129 | DL430-129 | $6.00 | |
| 1 | Kurt O-Ring, .750 I.D. X .937 O.D. - DL430-127 | DL430-127 | $6.00 | |
| 49 | 1 | Kurt Screw, BHCS M8 X 1.25 X 12MM LG for use with the HDLM4 Metr - 29-0168 | 29-0168 | $6.00 | |
| 50 | 1 | Kurt Screw, SS, Half Dog Point, M4 X .7 x 6MM Long - 28-1094 | 28-1094 | $6.00 | |
| 45 | 2 | Kurt Screw, SHCS, M4 X .7 X 50MM Long - 26-0050 | 26-0050 | $6.00 | |
| 15 | 1 | Kurt O-Ring, Buna N, #022 - DL430-68 | DL430-68 | $6.00 | |
| 23 | 1 | Kurt Retaining Ring - DL430-147A | DL430-147A | $6.00 | |
| 20 | 1 | Kurt O-Ring, Buna N, #021 - DL430-128 | DL430-128 | $6.00 | |
| 8 | Kurt Replacement O-Rings - MT4-96 | MT4-96 | $6.00 | |
| 28 | 3 | Kurt Clutch Spring, Stainless - DL640-215 | DL640-215 | $6.00 | |
| 4 | 1 | Kurt Wiper Ring - DL430-97 | DL430-97 | $7.00 | |
| 16 | 1 | Kurt Collar, Threaded - DL430-91-P | DL430-91-P | $35.00 | |
| 37 | 1 | Kurt Clutch - DL430-273A | DL430-273A | $50.00 | |
| 33 | 1 | Kurt Retaining Ring - DL430-231 | DL430-231 | $6.00 | |
| 5 | 1 | Kurt Retaining Ring - DL430-217 | DL430-217 | $7.00 | |
| 25 | 8 | Kurt Spring - DL430-197 | DL430-197 | $6.00 | |
| 13 | 3 | Kurt Thrust Bearing Washer, 0.060-0.063 - DL400-42A | DL400-42A | $8.00 | |
| 29 | 1 | Kurt End Cap - DL400-218 | DL400-218 | $12.00 | |
| 12 | 1 | Kurt Thrust Bearing - D40-41 | D40-41 | $8.00 | |
| 1 | Kurt Handle Assembly - D40XI-10-SA | D40XI-10-SA | $45.00 | |
| 2 | Kurt O-Ring, #110 - 360AU-99B | 360AU-99B | $6.00 | |
| 51 | 1 | Kurt Dowel Pin, 3/16 DIA - 04-0030 | 04-0030 | $6.00 | |
| 49 | 1 | Kurt Screw, BHCS, 5/16-18 X 1/2 - 03-0141 | 03-0141 | $6.00 | |
