| 4 | 1 | Kurt Rear Nut w/ End Cap - SCD640-3R | SCD640-3R | $208.00 | |
| 7 | 1 | Kurt Front Nut - SCD640-3F | SCD640-3F | $202.00 | |
| 16 | 2 | Kurt Collar - SCD600-8 | SCD600-8 | $45.00 | |
| 10 | 1 | Kurt Split Bushing - SCD600-60 | SCD600-60 | $18.00 | |
| 6 | 1 | Kurt Screw - SCD600-5-CP | SCD600-5-CP | $208.00 | |
| 20 | 2 | Kurt Movable Jaw, Special - SCD600-2S | SCD600-2S | $574.00 | |
| 18 | 1 | Kurt Retaining Plate - SCD600-227 | SCD600-227 | $49.00 | |
| 11 | 1 | Kurt Holding Block - SCD600-212 | SCD600-212 | $247.00 | |
| 30 | 4 | Kurt Screw, Set, Altered - SCD600-196 | SCD600-196 | $16.00 | |
| 5 | 3 | Kurt U-Cup Seal - SCD600-146 | SCD600-146 | $13.00 | |
| 29 | 4 | Kurt Movable Jaw, GIB - SCD640-13 | SCD640-13 | $32.00 | |
| 26 | 1 | Kurt Chip Guard, Short - DL600-248 | DL600-248 | $10.00 | |
| 2 | 1 | Kurt End Cap - DL600-218 | DL600-218 | $10.00 | |
| 21 | 2 | Kurt Spherical Segment - D60-9 | D60-9 | $9.00 | |
| 22 | 2 | Kurt Jaw Plate, 6" - D60-7 | D60-7 | $48.00 | |
| 8 | 4 | Kurt Thrust Bearing Washer - D60-42 | D60-42 | $7.00 | |
| 9 | 2 | Kurt Thrust Bearing - D60-41 | D60-41 | $7.00 | |
| 25 | 1 | Kurt Handle Assembly - D60I-10-SA | D60I-10-SA | $40.00 | |
| 14 | 2 | Kurt Screw, SHLDR, 1/2 X 1/2 - 03-2036 | 03-2036 | $11.00 | |
| 15 | 2 | Kurt Screw, BHCS, #10-24 X 3/8 - 03-0124 | 03-0124 | $6.00 | |
| 19 | 2 | Kurt Screw, SHSS, 1/2-13 X 1-1/4 - 01-3335 | 01-3335 | $23.00 | |
| 23 | 4 | Kurt Screw, SHCS, 1/2-13 X 1-1/4 - 00-1419 | 00-1419 | $6.00 | |
| 17 | 2 | Kurt Screw, SHCS, 1/2-13 X 5/8 - 00-1412 | 00-1412 | $6.00 | |
| 13 | 2 | Kurt Screw, SHCS, 3/8-16 X 1 Long - 00-1355 | 00-1355 | $6.00 | |
